Free-Standing LED Poster Display 640x1920mm: P1.25 to P3 Complete Guide

Foldable & Expandable — Converts from single 640×1,920mm screen to dual-sided 1,280×1,920mm video wall without tools, cutting booth setup time to under 10 minutes

GOB Surface Protection — Resin-encapsulated LED beads resist impact, dust, and daily cleaning; safe for damp-cloth wiping — ideal for rental and high-traffic retail

Dual-Sided Display — Side A and Side B support mirrored or fully independent content streams from a single power source

Ultra-Wide Viewing Angle — 140°/140° (H/V) ensures crisp, undistorted visibility for off-axis shoppers up to 70° from centre

5-Mode Content Control — App / U-disk / USB / Ethernet / 4G remote; update content network-wide in under 60 seconds, no IT staff required

High Refresh Rate — 3,840Hz standard / 7,680Hz high-speed mode eliminates camera flicker for DSLR and mirrorless photography environments

100,000-Hour Working Life — Equivalent to 22+ years at 12 hours/day operation; lower total cost of ownership than LCD alternatives

Wheeled Mobile Base — Single-operator repositioning in under 30 seconds; no lifting, no installation commitment

The XPD series requires no permanent installation. Setup completes in under 10 minutes by a single operator.

Step 1 — Positioning

Roll the unit to the desired location using the integrated wheeled base. No lifting required. Reposition in under 30 seconds.

Step 2 — Power Connection

Connect the power cable to any standard AC 110–220V wall socket. No dedicated circuit or electrical works needed.

Step 3 — Content Loading

Choose your preferred control method:

App (smartphone) — connect via Wi-Fi or 4G; upload content directly from your phone

U-disk / USB — pre-load content to USB drive; insert and play immediately

Ethernet — connect via network cable for stable, permanent content management

4G Remote — manage remotely with no on-site Wi-Fi required

PC Software — batch schedule and synchronise across multiple units

Step 4 — Brightness Configuration

Select brightness mode: Programmable (time-scheduled), Automatic (ambient sensor), or Manual. Recommended setting for most retail environments: Automatic.

Step 5 — Expanded Mode (Optional)

To switch to dual-sided 1,280×1,920mm configuration: unfold and lock the second panel into position. No tools required. Both sides activate simultaneously from a single power source.

⚠️ Indoor use only — IP30 rating. Do not expose to rain, direct sunlight, or humidity above 95% RH.